Registration With The Dab Service Centre; Use Of The Dconnect Dab App; Configuration; Local Control (Point-To-Point) - DAB DCONNECT BOX2 Anleitungen Für Die Installation

- To ensure the successful registration and installation of the DConnect Box2, it is necessary to read carefully and follow all the instructions
given in the DConnect DAB App.

9. REGISTRATION WITH THE DAB SERVICE CENTRE

1. If you do not already have a DAB Service Centre account, please register by clicking on "Register". A valid and accessible email address
is required.
2. Enter all required data marked with an asterisk.
3. Please agree to the privacy policy and fill in the required data.
4. Confirm your registration by clicking on "REGISTER".

10. USE OF THE DCONNECT DAB APP

Before starting the APP, make sure that:
- You have properly connected the DConnect Box2 and all the devices to be managed (see the relevant section).
- You have a very good WiFi signal reception.
- You have Internet access when using the DConnect service (cloud).
- You have installed the DConnect APP on your smartphone/tablet and are registered at the service centre.
The DConnect DAB App allows you to configure the DConnect Box2 to connect it to the DAB Service Centre and to control your installations
remotely.

11. CONFIGURATION

11.1 Local control (POINT-TO-POINT)

The DConnect Box2 offers the possibility to control the pump in point-to-point mode: your smartphone can be used as the pump display. The
point-to-point connection requires the operator to be in the immediate vicinity of the DConnect Box2.
NOTE: For systems such as E.sybox Diver, the DConnect Box2 becomes indispensable for the configuration and control of the pump, which,
being submerged, does not offer a display.
Click on the TAB of the APP as shown in the following figure to configure the local control. With this function it is possible to act on the pump
using the DConnect Box2. This is, in fact, transformed into a WiFi HotSpot (network name DConnectBox2-xxxxx where xxxxx are the last digits
of the serial). The user, through his smartphone, will have to connect to the HotSpot and it will be possible to act on the pumps connected to the
DConnect Box2. Read carefully and follow the procedure provided by the APP itself to complete the configuration.
In local control it is impossible to access the functionality of the DConnect Cloud service because there is no connection to the DAB Service Centre.
ENGLISH
Figure 3: Registration with the DAB Service Centre
15
Figure 2: APP DCONNECT icon