Brandson Equipment 304967/20200901NB155 Bedienungsanleitung Seite 32

battery before cleaning. Use a soft brush attachment on your vacuum cleaner to
clean the detector. Carefully remove any dust on the detector components, espe-
cially on the openings of the sensing chamber. Replace the battery after cleaning.
Test the detector to ensure that the battery has been inserted correctly. Ensure
that the test button is not blocked.
If fault alarms continue to emanate from the detector, you should check whether
the detector is positioned adequately. Install your smoke detector in another place
if it is not properly positioned.
CAUTION!
10. Additional safety instructions
Make sure that your family know the causes and effects of carbon monoxide poiso-
ning. Check the CO detector once a month.
Exchange empty batteries immediately. A qualified technician should check the
installation. Regularly examine your fuel-burning equipment such as fireplaces or
gas ovens.
Do not use any grill within your house or your garage.
Keep yourself informed and pay attention to any signs of carbon monoxide poi-
soning such as, for example, discomfort, headache, vertigo, nausea, shortness of
breath and cramps.
32
English