VOLTCRAFT 2399954 Bedienungsanleitung Seite 99

Mode 13
Function
Setting
• For mode 1 to 13, you can apply an additional function to de-
lay the logging start time. Enter minute(s) value in "START
DELAY MINUTES" during configuration setting.
LC display indication
2
• Some settings do not have any indication on LC display. In
order to review settings, please refer to "Review configuration
settings" on page 93.
•
Logs data immediately and circularly.
Should you wish an additional stop mode you
choose:
Logging stops after PDF report generation.
• Select "CIRCULAR LOGGING" as "RECORD
START CONDITION".
• Select "AFTER PDF CREATED" as "STOP
STYLE".
If there is not any display indicator or once
the data logger starts/stops recording, the
latest measurement is shown on display.
99