Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
1. Antenna
2. POWER switch button
3. LCD Screen
4. UP button
5. VOL+ button
6. Headphone jack
7. Power input socket
TYPE-C
BATTERY RECHARGE
1. Charge the device with a 5V
ger (not included);
2. The battery symbol will display a lightning symbol when
charging, and it will display a full grid when it is fully
charged. If the charging is turned off, it will automatically
go to the Standby state.
Note: with low battery, the radio may have abnormal behavior;
in this case proceed with recharging the battery.
SWITCHING ON/ OFF - STANDBY
Switch ON/ stand-by
1
In the shutdown state, short press the POWER (2) key to
enter the standby state, only the time and date are displa-
yed. Then press the power on again to enter the FM/DAB
band.
2. The device will go to the DAB reception system.
When first turned on, the device will automatically scan
the DAB/DAB + stations.
Switch OFF
3. Short press the POWER (2) key to enter the Standby state,
and then long press to shut down. If you do not use this
product for a long time, please turn it off.
FM/DAB SELECTION AND VOLUME ADJUSTMENT
1. Press BAND (9) button to switch between the DAB/DAB+
reception band and the FM band;
2. Press VOL+ (5) button and VOL- (8) button to adjust the
volume.
6
8. VOL- button
9. BAND Switch button
10. ENTER button
11. DOWN button
12. MENU button
13. INFO button
14. Speaker
1A TYPE-C battery char-
SETTINGS MENU
1. Press MENU (12) button, the settings menu will appear on
the display;
2. Press UP (4) button or DOWN (11) button and select the
desired item;
3. Press ENTER (10) button to enter the settings of the
selected item, press INFO (13) button to go back.
The following items are available in the settings menu (some
are displayed depending on whether DAB or FM mode is
selected):
Full scan (DAB): selecting this item automatically scans and
stores received radio stations.
Preset recall (DAB/FM): recall preset stations.
Preset store (DAB/FM): preset station.
Scan Setting (FM): allows you to search on FM stations with a
Strong signal or on All stations found.
Manual tune (DAB): select the desired frequency/channel
and confirm with ENTER (10) button. A bar will show the
strength of the received signal.
DRC (DAB): allows you to enable/disable the DRC function to
improve the sound when listening in noisy environments.
You can set the DRC level to high (high), low (low) or off
(off ).
Prune (DAB): allows you to delete from the list of stored sta-
tions all the radios found but not available (poor signal).
TA (DAB): enable/disable traffic announcement.
System: this item allows access to further settings.
Sleep: allows you to set an auto-off timer after which the
appliance will go into standby mode automatically. It is
possible to select between 90, 60, 45, 30, 15 minutes.
In the "Off" item the function is deactivated.
Alarm: allows you to activate and set two alarms. After
selecting ALARM, press the UP (4) button to select ALARM
1 or 2 and confirming you enter a submenu in which to
set:
On Time: set the activation time of the alarm.
Duration: duration in minutes of the alarm clock.
Source: set the type of ringtone between Buzzer
DAB, FM. Selecting DAB or FM is then prompted
to select one of the radio stations saved in
memory.
Frequency: Daily (every day), Once (once only),
Weekends (on Saturdays and Sundays), weekdays
(from Monday to Friday).
Volume: alarm alarm playback volume, a bar is
displayed.
Alarm: On/Off to activate/deactivate the alarm.
Time: allows you to set the current time/date.
Set Time/Date: set the current time and date.
Auto Update: select from which source you
automatically set the time and date if available.
Set 12/24 Hour: set the 12/24H time format.
Set Date Format: set the date format.
Backlight: allows you to set the time and brightness level
of the display:
Timeout: set the time after which the display
lowers the brightness without commands.
On Level: indicates the brightness level of the
display when the device receives commands.
DAB 7F91 R
Werbung
Inhaltsverzeichnis
