Bagging The Clippings; Operating The Bag-On-Demand Lever - Toro Recycler 20961 Bedienungsanleitung

Bagging the Clippings

Use the grass bag when you want to collect grass and leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove it; refer to
15). If the bag-on-demand lever is in the recycling position, move it to the bagging position; refer to
the Bag-on-Demand Lever (page
Installing the Grass Bag
1. Raise and hold up the rear deflector (A of
2. Install the grass bag, ensuring that the pins on the bag rest in the notches on the handle (B of
3. Lower the rear deflector.
Removing the Grass Bag
To remove the bag, reverse the steps in
Operating the
Bag-on-Demand Lever
The bag-on-demand feature allows you to either
collect or recycle grass and leaf clippings while the
grass bag is attached to the machine.
•
To bag the grass and leaf clippings, press the
button on the bag-on-demand lever and move the
lever forward until the button on the lever pops up
(Figure 16).
All manuals and user guides at all-guides.com
14).
Figure 15).
Figure 15
Installing the Grass Bag (page
14
Removing the Side-Discharge Chute (page
14).
Figure 16
1. Bag-on-demand lever (in the bagging position)
•
To recycle or side-discharge the grass and
leaf clippings, press the button on the lever and
move the lever rearward until the button on the
lever pops up.
Important:
For proper operation, shut off
the engine, wait for all moving parts to stop,
and then remove any grass clippings and
debris from the bag-on-demand door and the
surrounding opening
Operating
Figure 15).
(Figure 17) before you
g233434
g198723