of your sound processor or implant. Care should be taken to avoid
exposure of the system to static electricity.
•
Do not attempt to pair your sound processor to any accessories while
driving or operating heavy machinery.
•
Pair the sound processor to Bluetooth devices only in a secure
environment, such as at home or in the hearing care professional's
office.
•
Unwanted paired Bluetooth devices can be overwritten by pairing
with authorized devices or can be deleted during fitting by your
cochlear implant professional.
•
Do not stream audio to your sound processor while driving or
operating heavy machinery.
•
Attenuating ambient sounds or adjusting environmental balance
while streaming audio (either with the multifunction button or with the
mobile application) may compromise situational awareness.
•
Use your sound processor for hands-free phone use only where
permitted by law and only when you will not be distracted from the
safe operation of your vehicle.
•
Do not use your Advanced Bionics wireless accessories when
instructed not to use wireless electronic devices, such as on
airplanes.
•
Remove your sound processor and headpiece before entering
a room where an MRI scanner is located and prior to having any
surgeries that involve electrocautery and diathermy.
•
Remove your sound processor and consult your cochlear implant
professional if uncomfortable sounds are heard or in case of
discomfort, pain or skin irritation.
•
If the sound processor or accessories become unusually hot or
warm, discontinue use immediately and contact Advanced Bionics or
your cochlear implant professional.
•
Do not use a headpiece, magnet, or any associated part, that is
broken, damaged, or cracked.
•
The color cap must be attached when the headpiece is in use.
•
Due to increased risk of strangulation, do not use cables longer than
81cm (32") with young children.
•
The large Slim HP Color Cap is for use by recipients older than 3
years of age, as this color cap and the Slim HP magnet may become
displaced upon dropping.
•
Do not remove or replace the Slim HP cable from the sound
4