Troubleshooting - Krups COOK4ME TOUCH Bedienungsanleitung

If any of the safety systems are activated:
• unplug the Cook4me Touch,
• allow the Cook4me Touch to cool
completely,
• open the Cook4me Touch,
• check and clean:
- the safety valve,
- the ball,
- the covering.
If your Cook4me Touch is still leaking
or not working, take it to an Approved
Service Centre.
An Approved Service Centre
is a repair centre that has
been approved by Krups.
54
Regulating the Cook4me Touch:
When pressure cooking,
the Cook4me Touch
can emit small amounts
of steam. This serves to
automatically regulate
the pressure.
The Cook4me Touch lid:
The metal lid should only be
used with the Cook4me Touch.
The metal lid should not be
used with other equipment.
The Cook4me Touch lid is easy
to recognise thanks to the red
safety valve.

TROUBLESHOOTING

You may encounter various problems when using the Cook4me Touch.
The lid does not close:
There may be something stuck between the
•
bowl and the hot plate.
Remove the bowl to check that all parts
are clean:
- the heating plate,
- the central element,
- under the bowl.
Also check that the central element
can move around.
The lid release handle is not in the correct
•
position.
Ensure that the release handle is
fully open.
• The metal lid is not installed correctly.
Ensure that all elements of the metal lid
are in the correct position.
• The bowl damaged after being hit
or dropped.
The bowl should be replaced
at an Approved Service Centre.
The Cook4me Touch pressure
fails to raise and steam is not
being released properly:
• The gasket seal is dirty or damaged.
Ensure that the gasket seal is clean and
in good condition
55