Chapter 4: Using The Wireless Network Monitor Link Information Screens - Cisco Systems Linksys WMP54G Schnellinstallationsanleitung

Wireless-G PCI Adapter
Wireless Network Status
The Wireless Network Status screen provides information on your current network settings.
Status - This shows the status of the wireless network connection.
SSID - This is the unique name of the wireless network.
Wireless Mode - The mode of the wireless network currently in use is displayed here.
Transfer Rate - The data transfer rate of the current connection is shown here.
Channel - This is the channel to which the wireless network devices are set.
Security - The status of the wireless security feature is displayed here.
Authentication - This is your wireless network's authentication method.
IP Address - The IP Address of the Adapter is displayed here.
Subnet Mask - The Subnet Mask of the Adapter is shown here.
Default Gateway - The Default Gateway address of the Adapter is displayed here.
DNS - This is the DNS address of the Adapter.
DHCP Client - This displays the Adapter's status as a DHCP client.
MAC Address- The MAC address of the wireless network's access point or wireless router is shown here.
Cisco AP IP - This displays the Cisco AP IP Address when LEAP wireless security is used.
Signal Strength - The Signal Strength bar indicates the signal strength.
Link Quality - The Link Quality bar indicates the quality of the wireless network connection.
Click the Back button to return to the initial Link Information screen. Click the Statistics button to go to the
Wireless Network Statistics screen. Click the Save to Profile button to save the currently active connection
settings to a profile.
Chapter 4: Using the Wireless Network Monitor
Link Information Screens
All manuals and user guides at all-guides.com
Figure 4-3: More Information - Wireless Network Status
24