Cisco Systems Linksys WMP54G Schnellinstallationsanleitung Seite 13

Refresh - Click Refresh to perform
a new search for wireless devices.
Connect - To connect to one of
the networks on the list, select the
wireless network, and click Con-
nect. If the network has wireless
security enabled, a screen requir-
ing security information will
appear.
If the network has WEP encryption
enabled, then you will see the WEP
Key Needed for Connection
screen. Select the appropriate
level of WEP encryption, 64-bit or
128-bit Then enter the network's
Passphrase or WEP Key. To connect
to the network, click Connect. To
cancel the connection, click Can-
cel.
If the network has WPA Personal
security enabled, then you will see
the WPA-Personal Needed for
Connection screen. Select the
appropriate encryption type, TKIP
or AES. Enter the network's Pass-
phrase or pre-shared key in the
Passphrase field. To connect to
the network, click Connect. To
cancel the connection, click Can-
cel.
If the network has PSK2 Personal
security enabled, then you will see
the PSK2-Personal Needed for
Connection screen. Enter the net-
work's Passphrase or pre-shared
key in the Passphrase field. To con-
nect to the network, click Con-
nect. To cancel the connection,
click Cancel.
All manuals and user guides at all-guides.com
WEP Key Needed
WPA-Personal Needed
PSK2-Personal Needed
13