Klarstein GALERAS Bedienungsanleitung Seite 41

• Place the safety glass at the front of the fireplace, aligning the slots in the
bracket on each side of the glass with the lugs on the sides of the fireplace
(see figure 10).
Note: 2 people are required for this installation step.
• Fix the safety glass with four white screws (4 x 8 mm on both sides).
Manual operation
• The switches are located on the centre right side of the unit. The standby
switch must be switched on first.
Note: Read the operating instructions carefully and keep them for future use.
Figure 10
EN
41