Endress+Hauser Promag 400 Index C Installationsanleitung Seite 13

8.4 Transmitter, isolated from ground option
NOTICE
Damage to the measuring device!
The measuring device can be destroyed if the grounding switch is in the incorrect position.
‣
Check that the grounding switch is in the correct position and correct if necessary!
1
‣
Set the grounding switch of the
ISEM to the "right" position
(open).
8.5 Further information on reassembling the transmitter housing,
remote version, standard version or version that is isolated from
the ground
Before reassembly, insert the S-DAT which you removed into the amplifier board (Fig. 1
below).
1
Endress+Hauser
EA01098D
13