Promag 5D4C, 5L4C, 5W4C Transmitter, Remote Version - Endress+Hauser Promag 400 Index C Installationsanleitung

EA01098D
8 Promag 5D4C, 5L4C, 5W4C transmitter, remote
version
8.1 Replacing the connection board
Proceed as described in Section 7.4→  8.
8.2 Reassembling the transmitter housing, remote version
8.3 Standard transmitter
NOTICE
Poor measuring performance!
If the grounding switch is in the wrong position, this impacts the measuring performance!
‣
Check that the grounding switch is in the correct position and correct if necessary!
1 →
‣
Version A: If a grounding switch
is provided on the ISEM: set the
grounding switch of the ISEM to
the "right" position (open).
12
2
‣
Version B: If a jumper is
provided on the ISEM: plug in
the jumper for the ISEM
grounding setting on the outside
(open).
Endress+Hauser