Training Computer - capital sports Stringmaster Bedienungsanleitung

TRAINING COMPUTER

Insert an AAA (1.5V) battery into the battery compartment of the monitor.
Note that all values are reset to zero when the battery is changed.
Auto On/Off As soon as training is started, the display automatically
shows the data received from the sensor. The monitor
switches off automatically if there is no exercise
for 4 minutes or if no button is pressed. The values
generated up to that point remain stored. Press the
button for 2 seconds to reset all values.
Auto Scan After the start of the training, the display automatically
switches on the COUNT, TOTAL COUNT and TIME
screens in 6-second intervals.
Count Display of moves from 0 to 9.999
Total Count Display of all moves made so far from 0 to 9.999
Time Display of the previous training time from 00:00 to
99:59. Press the button briefly to jump directly to the
time display.
Calories Display of estimated number of calories burned during
training from 0.0 to 9.999. Press the button briefly to
jump directly to the calorie display.
EN
27