BRAYER BR1502 Sicherheitshinweise Und Bedienungsanleitung Seite 9

• This kitchen machine has been designed with
covers (1, 11) for the installation places of additional
attachments (included), the covers removed activate
the system preventing the kitchen machine switching-
on with no attachment installed. Always check the
correct covers installation before using this kitchen
machine (1, 11), otherwise it will not turn on.
• Hold the motor unit (2) with your hand and press the
lock lever (3), the motor unit (2) will be fixed in the
upper position (pic. 1).
• Set the bowl lid (8) in its installation place (10).
• Turn the lid (8) to fix it.
• Set the bowl (7) in its installation place (6) and turn it
clockwise (pic. 2).
• Install one of the attachments (12, 13 or 14) on the
shaft (9), to do this, slightly press the attachment
upwards and turn it counterclockwise until tight (fig.
3, 4). Make sure that the attachment is properly fixed.
• Place the required ingredients in the bowl (7).
• Press the lock lever (3) and hold it, press the upper
part of the motor unit (2), lower it to the operation
position and release the lever (3). Make sure that
the motor unit (2) is securely fixed in the operation
position (pic. 5).
• Connect the power plug to an electrical outlet.
Note: Imake sure that the covers for the installation
places of additional attachments (1, 11) are correctly set
and fixed.
• To activate the kitchen machine turn the operation
mode switch knob (4) clockwise and set the required
attachment rotation speed «1---10».
Note: when making yeast dough, use lower Dough
Hook (14) rotation speeds.
• Always start at a lower speed, then gradually
increase the attachment rotation speed
• You can add the required ingredients during the
operation through the opening in the lid (8).
• To switch the kitchen machine on for a short time,
turn the operation mode switch (4) to the "P" position.
For a short Kitchen Machine operation session, set
the Operation Mode Switch (4) to «Р» and hold it
down.
• Upon completion set the operation mode switch knob
(4) to the «0» position and disconnect the power plug
from the electrical outlet.
• Hold the motor unit (2) with your hand and press the
lock lever (3), the motor unit (1) will be fixed in the
upper position (pic. 1).
• Remove the installed attachment by turning it
clockwise (fig. 3).
• Turn the lid (8) and remove it.
• Remove the bowl (7) by turning it counterclockwise.
• Remove food from the bowl (7).
• Wash the used attachment and the bowl (7) with
warm water and a neutral detergent, rinse and dry.
EN 9