Alert Setting - Bresser 7003510 Bedienungsanleitung

4.9.5.3 CHECK SENSOR STATUS
1. In this section, press
2. Press key twice to select the sensor type icon
3. Press the key again to show the sensor connection status as below:
4.9.6

ALERT SETTING

In this section, press
4.9.6.1 SET INDOOR ALERT
1. In the indoor row, press
alert setting screen.
to adjust the value or on / off alert.
2. Press /
to select different setting value.
3. Press /
4. Press to select different row of the setting.
/
5. Once finished, Press
screen or press [ home ] key for back to normal
screen.
/ key to select the connected sensor.
/ key to select indoor, outdoor sensor, channels or other settings.
key to enter indoor
until back to the alert
28