User Information; Electrical Safety - Kettler GYM@HOME TRACK S6 Montageanleitung

IMPORTANT INFORMATION
Important! Please read these instructions carefully before installation and first use.
You will receive important information for your safety as well as for the use and
maintenance of the appliance. Keep these instructions somewhere safe for informa-
tion purposes or for maintenance work or ordering replacement parts. Pass these inst-
ructions on with the appliance if the owner of the appliance changes.
This symbol indicates an important warning.
These instructions can also be downloaded at www.kettler.net.

1.0 User Information

• Caution! Please ensure you observe the instructions in the booklets "Safety Instructions and
Instructions for Initial Operation and Maintenance"
handling, biomechanics"
• This symbol
• This symbol
• This symbol
• This sport appliance corresponds to DIN EN ISO 20957-1:2014, and ...
• DIN EN ISO 20957-6:2017, Accuracy HB

2.0 Electrical Safety

Warning! Danger due to electric current!
Electric power is always a potential source of danger. Always use the appliance with the
necessary caution.
Do not expose the appliance to moisture! Protect it from contact with liquids
• The properly installed electrical socket to connect the appliance must be easily accessible.
• Before connecting the plug of the mains adapter/device with the socket, the mains adapter/
appliance voltage must be compared to the local voltage. If the values do not match, please
contact our service team.
• After switching the appliance off, remove the plug from the power supply again.
• Be very careful in ensuring that the cable does not become trapped or a "tripping ha-
zard".
• Connect the cable with a grounded safety socket. Do not connect via multiple socket strips!
When using an extension cable, this must comply with the VDE guidelines.
Do not use damaged cables again and exchange them immediately. If the mains line is da-
maged, this must be replaced by the manufacturer, a member of the service team or another
qualified specialist to avoid danger.
• This symbol indicates that the appliance is protection class I.
• This symbol indicates that the appliance is protection class II.
• This symbol indicates that the appliance is protection class III.
The appliance may only be used with the mains adapter provided.
3
.
indicates an Allen key.
indicates a torque wrench.
indicates a screwdriver.
Track S2, S4, S6 |
1
and „Computer/training instructions,
EN
7