Electrophoresis (Gel) Mode - BRAND Transferpette electronic Gebrauchsanleitung

5 Pipetting programs

5.4 Electrophoresis (GEL) mode

Program for loading electrophoresis gels. A previously defined sample volume is aspirated at a high,
variable speed and slowly released again.
Volume and speed setting, see Set volume, p. 51 and Set the aspiration and dispensing speed, p. 52.
a.
3 x
b.
c.
1 x
d.
1 x
e.
1 x
60
Operating manual
a.
Call up menu selection: Pressing the menu key three
times takes you to the program selection.
ð
'Mode' flashes.
b.
Set GEL mode: Use one of the arrow keys to scroll
through the modes until 'GEL' appears.
ð
'Mode' continues to flash.
c.
Confirm GEL mode: Press 'Enter' key. The display now
shows 'blo' for blow-out.
d.
Preparing for pipetting: Press the pipetting key once to
move the piston to its start position.
ð
The arrow in the display points upwards (aspiration).
e.
Aspirate liquid: Press the pipetting key once to aspirate
the liquid.
Transferpette® electronic 997209