Pkm BIC8 GK-2KB Bedienungsanleitung Seite 84

1. Before installing the hob, you must fix the adhesive seal
the hob properly (s. fig. below).
The seal must be fitted tightly on the bottom edge of the hob (no overlaps, no
gaps etc.) to prevent liquids etc. from entering the installation opening
subsequently.
Fig. similar.
1
2
3
4
5
6
2. Install the fixing brackets on the housing of the appliance (s. the following
description).
a. Place the appliance on a stable and soft surface (use the packaging).
b. Do not exert any physical force to the control elements of the appliance.
c. Install the fixing brackets on the sides of the hob using the corresponding
screws: screw one end of the fixing brackets into the pre-drilled holes (as shown
in the fig. below).
Depending on model.
22
I
NSTALLATION OF THE HOB
O
UTER EDGE OF THE HOB
O
H
OW TO INSTALL THE FIXING BRACKETS
~
S
EAL
H
OB
W
ORKTOP
UTER SIDE OF THE SEAL
B
OTTOM OF THE HOB
~
84
22 on the bottom edge of