P
OSSIBLE CAUSES
1. You used unsuitable cookware with
sharp edges.
2. You used an unsuitable detergent,
e.g., an abrasive.
S
OME COOKWARE MAKE CRACKING OR CLICKING NOISE
1. Your cookware is produced with
layers made of different kinds of
metal.
T
HE APPLIANCE OR A COOKING ZONE HAS BEEN SWITCHED OFF
AUTOMATICALLY AND UNEXPECTEDLY
ERROR CODE IS DISPLAYED
1. Technical malfunction.
1. You have not set a temperature.
2. You have not set the timer
3. The heating element is defective.
1. The illuminant is loose or damaged.
N
OISE CAUSED BY THE FAN INSIDE THE APPLIANCE
1. The cooling-fan the appliance is
equipped
with
electronics from being overheated. It
may continue to run even after you
have switched the appliance off.
Depending on model.
33
Depending on model.
34
Depending on model.
35
Depending on model.
36
M
ALFUNCTION
T
HE GLASS CERAMIC IS SCRATCHED
33
(
TYPICALLY ALTERNATING WITH ONE OR TWO
DIGITS ON THE TIMER
T
HE APPLIANCE DOES NOT HEAT
.
35
T
HE INTERNAL LIGHT DOES NOT WORK
36
protects
the
~
MEASURES
1. Use suitable cookware.
2. Use suitable detergents.
1. This is normal for such a cookware
and does not indicate a malfunction.
,
AN ACOUSTIC SIGNAL SOUNDS AND AN
-
).
DISPLAY
1. Note the complete error code
disconnect the appliance from the
mains and contact the shop you
purchased the appliance at
1. Set a temperature.
2. Set the timer.
3. Please contact the aftersales service.
1. Tighten or replace the illuminant.
1. Normal operating condition. Do not
disconnect the appliance from the
mains while the fan is running.
~
126
.
.
.
.
.
34
,