Quick Chuck; Mount And Remove Impellers - Heidolph Hei-TORQUE Expert Betriebsanleitung

Operation

Quick Chuck

Mount and remove impellers

Warning: Risk of injury!
If the device is not switched off when you open or close the chuck,
rotation may start unexpectedly. This may cause serious injury.
Always switch the device off before opening and closing the chuck.
Remove impellers
➜
The device is switched off.
➜ Hold the installed impeller with
one hand.
➜
Turn the safety ring 90° clockwise.
➜ The safety ring is now open.
➜ Pull the safety ring down as far as
it will go.
➜ Turn the quick chuck counter-
clockwise to open.
➜
The quick chuck is fully open when
a slight resistance is noticed.
➜ Remove the impeller.
Safety ring
closed
Quick chuck
Safety ring
open
Safety ring lower
position
Open
Quick chuck
91