Temperature Indicator / Supercool Function / Temperature / Switching Off The Appliance Refrigerator Compartment Equipment / Inner Door / Shelves / Bottle Holder - Electrolux IK2065RE Bedienungsanleitung

Use
Temperature indicator
The temperature indicator gives a variety of information.
• During normal operation, it shows the temperature insi-
de the refrigerator compartment. (actual temperature).
• When setting the temperature, the temperature set for
the refrigerator compartment (nominal temperature) at
that moment blinks.
Caution: as many as 24 hours may be required before the
temperature indicator shows the actual temperature.
SUPERCOOL function
The SUPERCOOL function speeds up the cooling of fresh
food products while at the same time protecting those
already stored from undesirable heating. A nominal tem-
perature of +2°C is automatically pre-set.
• The function turns on by pressing the SUPERCOOL
button (I). The yellow indicator (H) lights up.
• It is possible to stop this function at any time by pres-
sing the SUPERCOOL button once again. The yellow
indicator turns off.
• If the SUPERCOOL function does not stop manually, it
is automatically cut off electronically after about 6
hours.
The SUPERCOOL function is deactivated if the elec-
tric current is cut off!
Temperature
There are different temperature zones in the refrigerator
compartment. The warmest zone is at the top, and the col-
dest zone is above the cover of the vegetable bins.
The internal temperature is influenced by the following
factors:
• Room temperature
• How often the door is opened
• Amount of food products stored
• Appliance setting
Switching off the appliance
To switch off the appliance, keep the EIN/AUS (ON/OFF)
button pressed until the temperature indicator turns off.
The selected temperature setting is stored, even if the
electric current is cut off.
16
All manuals and user guides at all-guides.com
Refrigerator compartment equipment
Inner door
The shelves of the inner door can be removed to be
moved or cleaned.
Shelves
The distance between shelves can be altered as one likes.
To remove the shelves, lift from the bottom and pull
forward until they move upwards or downwards and can
be pulled out. Put the shelves back in the desired position.
Bottle holder
The bottle holder clipped onto a shelf is used for storing
bottles and cans. To remove the bottle holder, lift the glass
shelf below and gently remove it.
Then remove the bottle holder and put the glass shelf
back in.