Weather Station - Auriol Z31055A Bedienungs- Und Sicherheitshinweise

All manuals and user guides at all-guides.com
the location (e.g. place the weather station near
to a window).
If this does not work, carry out a restart, if
necessary. To do this, press and keep pressed
Z
the Z
Reception may be considerably reduced by obstruc-
tions (e.g. concrete walls) or sources of interference
(e.g. other electrical devices).
If the reception of the radio signal continues to be
interrupted, you can set the time and date manu-
ally (see "Setting the language / time zone / time /
date manually").
Mounting the weather station and / or
the outdoor sensor on a wall:
Note: You will require an electric drill and a
crosshead screwdriver for this step.
CAUTION! DANGER TO LIFE, RISK OF
INJURY AND MATERIAL DAMAGE! Read
the operating and safety instructions for your drill
carefully.
that you do not hit electricity, gas or water lines
when you drill into the wall. If necessary, check
with a pipe and cable detector before drilling.

Weather station

Mark the position of the hole (ø approx. 7 mm)
on the wall.
Drill the hole with an electric drill.
14 GB/IE
/ REGISTER button
DANGER TO LIFE! Take care
..
18