Preparing To Use The Outdoor Sensor; Inserting The Batteries; Preparing The Weather Station For Use - Auriol Z31743A Bedienungs- Und Sicherheitshinweise

Inserting the batteries:

Inserting the batteries:
Connecting the weather station with the
outdoor sensor and the DCF radio signal:
After the batteries have been inserted, the
weather station attempts to establish a connection
14 GB
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 14
Preparing to use
the outdoor sensor
Remove the battery compartment cover from
the back of the outdoor sensor.
Insert two 1.5 V
into the battery compartment
Note: Make sure you fit the batteries the
right way round (polarity). This is shown in the
battery compartment (see. fig E).
The outdoor sensor is now ready for use and
the control LED
Close the battery compartment cover.
If this does not work, carry out a restart, if
necessary. To do this, press and keep pressed
Z
the Z / REGISTER button
Preparing the weather
station for use
Open the battery compartment
back of the weather station.
Insert two 1.5 V
into the battery compartment.
Note: Make sure you fit the batteries the
right way round (polarity). This is shown on
the battery compartment (see. fig E).
Close the battery compartment cover.
batteries (AA) (included)
30
illuminates briefly.
28
.
18
batteries (AA) (included)
.
on the
24
30.08.13 08:34