Table for classification of blood pressure values (unit of measurement mmhg) for adults:
Range
Hypotonia (degraded blood pressure)
Normal range
Pre-hypertensive blood pressure range*
High blood pressure - degree
High blood pressure - degree
(*) Blood pressure range that might transfer to high blood pressure
The WHO classification in the display shows the range of
the measured blood pressure.
If the values for systolic and diastolic pressure are in two
different WHO ranges (e.g. systolic in the grade
sion range and diastolic pressure in the normal range), the
WHO classification on the unit always indicates the higher
range (grade
hypertension in the example described).
6. saving, retrieving and deleting results
The computer automatically saves the blood pressure read-
ings of the last 50 measurements. When the 50 memory lo-
cations are exceeded, the current oldest value is deleted.
You can display the memory as follows:
• Press the „User-Switching key"
ry zone, and press the „M" key to switch from memory to
memory with sequence numbers.
• The saved measured values are continuously stored.
All manuals and user guides at all-guides.com
systolic
lower than 105
between 105 and 120
between 120 and 140
between 140 and 160
higher than 160
• Press the On/Off switch
• If you forget to switch off the computer, it will switch off
hyperten-
Press the „User-Switching key"
zone, then press and hold the „M" key for approximately
5-seconds to clear the data in the pre-designated memory
zone. The data in both memory zones – zone 1 and zone 2
may be erased if any of the batteries is removed.
7. Cleaning and storing the instrument
• Clean your blood pressure computer carefully using only
• Do not use any detergents or solvents.
to select a memo-
• Never hold the instrument under water as otherwise liquid
• Never place any heavy objects on the instrument.
16
Diastolic
lower than 60
between 60 and 80
between 80 and 90
between 90 and 100
higher than 100
automatically after 1 minute.
a slightly moistened cloth.
can penetrate and damage the instrument.
Action
Check with doctor
Self check
Check with doctor
Consult your doctor
Consult your doctor
Adapted from JNC 2003
to turn the unit off.
to select a memory