Troubleshooting
Problem
The air fryer does not
turn on.
Foods are not completely
cooked.
Foods are cooked
unevenly.
Foods are not crispy .
Baskets will not slide
into the air fryer
securely.
White smoke is coming
out of the air fryer.
Black smoke is coming
out of the air fryer.
Display shows Error code
"E1"
Display shows Error code
"E2"
Solution
Make sure the air fryer is plugged in.
Push the baskets securely into the air fryer.
Place smaller batches of ingredients into the inner
basket. If the basket is overstuffed, then ingredients
will be uncooked.
Increase cooking temperature or time.
Ingredients that are stacked on top of each other
or close to each other need to be shaken during
cooking.
Spraying or brushing a small amount of oil on foods
can increase crispiness.
Make sure the basket is not overfilled with food.
Make sure the inner basket is securely inside
the outer basket.
The air fryer may produce some white smoke when
you use it for the first time. This is normal.
Make sure the pan is properly cleaned and not
greasy.
Cooking greasy foods will cause oil to leak into the
outer basket. This oil will produce white smoke,
and the baskets may be hotter than usual. This is
normal, and should not affect cooking.
Unplug the fryer immediately. The food may be
burning. Wait for it to cool down to remove the
baskets and clean.
Contact the technical support service, sending
an email to hi@mellerware.com or through the
chat on the web www.mellerware.com
Contact the technical support service, sending
an email to hi@mellerware.com or through the
chat on the web www.mellerware.com
EN