Preface And General Information; About These Operating Instructions; Terminology Used - Lenze EPM-H510 Betriebsanleitung

Preface and general information

1 Preface and general information
The EPM-H510 keypad can be used to access codes of lenze controllers, 9300 Servo PLC and Drive
PLC and control these units.
The HMI Designer is a powerful development tool for creating projects containing the configuration
of the keypad.
The EPM-H510 keypad can be used with:
•
8200 frequency inverters (with AIF function module for system bus CAN)
•
8200 vector frequency inverters
•
93XX servos
•
9300 Servo PLC
•
Drive PLC
Controller connection via system bus (CAN)
1.1

About these Operating Instructions

•
These Operating Instructions are designed to describe safe and trouble-free working on and
with the EPM-H510 keypad.
•
All persons working on and with the EPM-H510 keypad must keep these Operating Instructions
to hand and observe all relevant information and notes.
•
These Operating Instructions must always be kept as a complete document and in a readable
state.
1.2

Terminology used

Term
Controller
HMI
42
All manuals and user guides at all-guides.com
In the following text used for
Lenze 8200 and 8200 vector frequency inverters, 9300 servo inverters
Human Machine Interface
EDBEPM-H510 DE/EN/FR 2.0
L