Topdon TORNADO 90000 Bedienungsanleitung Seite 14

CONSTANT VOLTAGE SUPPLY
The SUPPLY mode maintains power for vehicle programming and
extended maintenance ensuring operational order for both the
vehicle and battery.
CHARGING STEPS
1) DIAGNOSIS Checks the battery's initial condition including
voltage, state-of-charge, and health, to determine if the battery is
stable before charging.
2) DESULPHATION Uses voltage or high-frequency pulses to break
down the sulfates that have built up over time in the aging battery
to optimize life and performance.
3) PRE-CHARGE Starts the charging process with a low stable
current that gradually increases until the battery capacity returns
25%. This reduces the stress put on batteries by sudden surges.
4) SOFT START Provides a medium stable current until the battery
capacity returns 50%.
5) BULK CHARGE Begins the Bulk charging process based on the
condition of the battery until the battery capacity returns 80%.