Sharp KA-75L64BNH-EU Bedienungsanleitung Seite 126

On/Off
Defrost
Turbo
Function
Bottom
Function
Static
Function
Fan
Function
Double Grill
Function
Double
Grill + Fan
Function
Cleaning
Key Lock
The control unit will switch off after 5
minutes if no function is selected or
changed.
The appliance is operated using touch
control sensors. The functions are
controlled by touching the sensor fields.
When you are using the controls, make
sure that you touch the sensor field
correctly. If your touch is too flat or too small
the sensors will not operate correctly.
The cooling fan will switch on automatically
in order to keep the surfaces of the
appliance cool. The fan will continue to run
until it automatically switches off, even after
the oven has been switched off.
Oven Function Selection
Touch the ON/OFF " " sensor for 2
seconds to switch the control unit on.
All buttons appear on the first brightness
level and the oven will enter "WAIT" mode.
During this mode, you will be able to select
the desired cooking functions, adjust the
temperature, activate the BOOST " "
function, as well as adjust the cooking time,
end time, Minute Minder timer and the time
of day.
During "WAIT" mode, the desired cooking
function can be selected by touching one
of the function buttons. The function button
Mode Descriptions
Special
Functions
Pastry
Meat
Poultry
Fish
Pizza
Lamp
Play / Pause
Vap Clean
selected by the use will appear wth the
second brightness level.
When a cooking function is selected, the
default temperature value will show on the
Temperature display. This can be adjusted
using the THERMOSTAT " " PLUS " " and
MINUS " " sensor buttons on the side of
the display. The temperature can be
adjusted within the range of 50°C to 275°C.
After the desired function has been
selected, and the temperature and time are
set, touch the PLAY/PAUSE " " sensor to
start the oven function operation. While the
oven is operating, the play/pause button
brightens during the cooking time.
Adjusting the Time of Day
When the oven has been installed, the
time of day must be set according to the
following instructions.
Touch the ON/OFF " " sensor to switch the
oven on and enter "WAIT" mode. During
this mode, touch the MODE " " sensor
button until the time is selected. You can
adjust it using the PLUS "
adjustment, touch the MODE " " sensor
once again.
The time will only have to be set again if the
appliance is disconnected from the power
EN - 15
Temperature
Display
Boost
Meat Probe
Meat Probe
stop
Time Display
Cooking Time
Cooking end
time
Minute Minder
Mode
" sensor buttons. To complete the time
Slow Cooking
Very Slow
Cooking
Dough
Bread
Dry
Frozen Food
Minus
Thermostat
Plus
" and MINUS "