Setting Up - Stihl FG 1 Gebrauchsanleitung

English

Setting Up

Adjusting Filing Angle
Check filing angle in the following
N
table
Chain type Filing angle
Rapid Standard (RC...) 30°
Rapid Micro (RM...) 30°
Rapid Super (RS...) 30°
Picco Micro (PM...) 30°
Picco-Super (PS...) 30°
Ripping chain
(RCX, RMX, PMX) 10°
1
Swing the filing frame upwards.
N
Loosen the knurled nut (1).
N
To rotate the guide, lift it clear of the
N
teeth.
16
Set the filing angle (2), e.g. 30°.
N
Tighten down the knurled nut.
N
1
3
Position the master cutter (3) below
N
the center of the knurled nut (1).
Aligning the Filing Frame
2
1
Position the round file (1) between
N
the side plate and depth gauge of
the master cutter by swinging and
lifting the filing frame.
2
90°
Turn the acorn nut (2) to set filing
N
frame at a right angle to the
clamping jaws.
FG 1