Bluetooth Wireless Technology - HyperIce Normatec 2.0 Pro Bedienungsanleitung

BLUETOOTH WIRELESS TECHNOLOGY

The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc., and any use of such marks by Hyperice is under
license. In the unlikely event of loss of a stable Bluetooth connection, the system will attempt to re-establish its connection
automatically. The Normatec 2.0 Pro control unit is completely autonomous, and will continue operating normally, even
during a loss of connectivity. If this control unit does cause interference, which can be determined by turning the control
unit off and on, the user is encouraged to try to correct the interference by reorienting or relocating the control unit,
increasing the separation between equipment and the control unit, or connecting the control unit to a different outlet on a
circuit if it is plugged in.
The Normatec 2.0 Pro control unit uses Bluetooth 5.0 wireless technology with the following radio specifications:
Frequency 2.402 GHz to 2.480 GHz
Modulations GFSK at 1 Mbps, 2 Mbps data rates
Transmit Power +4 dBm
Receiver Sensitivity BMD-300/301: -96 dBm (BLE mode) BMD-350: -94 dBm (BLE mode)
Security AES-128
Contains Rigado, Inc. BLE Module BMD-300-A-R, FCC ID: 2AA9B04, IC ID: 12208A-04
This control unit complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
control unit may not cause harmful interference, and (2) this control unit must accept any interference received, including
interference that may cause undesired operation.
This control unit complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this control unit may not cause interference, and (2) this control unit must accept any interference,
including interference that may cause undesired operation of the control unit.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le onctionnement.
INTERNAL BATTERY INFORMATION
This Normatec 2.0 Pro control unit is equipped with a rechargeable lithium ion battery. The internal battery is designed
to allow use of the Normatec 2.0 Pro Sytem anywhere—even when power outlets aren't available. The Normatec 2.0