cecotec Conga Excellence Bedienungsanleitung Seite 27

along hard obstacles. After finishing cleaning, it goes back to the charging base.
4. Single room cleaning mode
If you only need to clean one room, choose the single room cleaning
mode. After finishing the job, it stops working. While using this mode,
please close the door, the product will do a better job
5. Return-to-charging-base mode
When the product detects that the battery volume is <15%,
it will go back to charge. Any time the user wants the product to go back
to charge, they can press the button on the remote control.
Time Scheduling mode
To make your life easier, this product has a "timer" function for its daily schedule. The user can
send an order to the product through the remote control. After applying the settings successfully,
the cleaner will perform the desired job every day automatically according to the setting.
* The remote control's time options are (12:00am – 11:59pm) and (12:00pm – 11:59pm).
* Before setting the current time and appointed time, please make sure the AUTO button on the
product is on with a green/blue color. If that is the case, the product is on a wake-up state, if not,
please press the AUTO button on the cleaner or on the remote control to wake it up.
1. Setting current time.
• Press the
clock area will blink.
• Adjust the time on the display with the
with the
• After finishing setting the time, press the OK button to save the setting. At the same time, you
will hear a "beep", meaning the time has been successfully set.
•
2. Timer setting.
• Press briefly the
of the remote control.
• Choose the desired time with direction buttons.
After finishing setting the time, press the OK button to save the setting. When the product makes
a "beep", the timer has been successfully set and the cleaner will start working every day at the
selected time automatically.
*if the OK button is not pressed, no appointed time will be set.
3. Cancel timer setting.
• Press the
05049_Conga Excellence Dry_Manual_SA.indd 27
button, the icon will be shown on the display of the remote control and the
buttons to set the current time.
button, the icon will appear and the clock area will blink on the display
key for 3 seconds. The
y buttons, switch between hours and minutes
icon willdisappear and the cleaner will emit two
Conga Excellence Dry
ENGLISH
27
11/8/17 15:40