cecotec Conga Excellence Bedienungsanleitung Seite 26

ENGLISH
on the control panel or on the remote control to wake it up.
* Press the power button on the top of the robot or any other in the remote control.
* If you need to change to any other mode, please read the (Mode Choice) section.
2. Stop working:
When the product is working, push the AUTO button on the control panel or the button on the
remote control to make it stop working.
MODE CHOICE:
In order to solve different ground conditions with a good clean finish, the product has different
cleaning modes. The user can choose the mode on the remote control accordingly.
1. AUTO mode
The most common cleaning mode. The product cleans the floor
automatically, if there are obstacles in front of it, it will change direction
automatically. This mode is used to clean the entire house. It is also the
option that the robot uses when scheduling the cleaning time. When the
robot has 15% of battery remaining, it will automatically return to the
charging base.
2. Spot mode
The garbage is gathered. The product works on a spiral. After finishing
cleaning, it goes back to the original position then stops working.
3. Edge-cleaning mode
This cleaning mode is used in order to clean corners. The product works
26 Conga Excellence Dry
05049_Conga Excellence Dry_Manual_SA.indd 26 11/8/17 15:40