Special Product Features; Inserting Batteries - LaserLiner CompactCube-Laser 3 Bedienungsanleitung

– In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limits in accordance with the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers – may apply.
Electronic devices can potentially cause hazards or interference or be subject
to hazards or interference.

Special product features

Automatic alignment of the device with a magnetically
dampened pendulum system. The device is brought into
initial position and aligns itself autonomously.
Transport LOCK: The device is protected with a pendelum
lock during transport.
Devices with PowerBright technology have special high-
performance diodes to produce super bright laser lines
These remain visible over longer distances, in bright
ambient light and on dark surfaces.
Number and direction of the lasers
H = horizontal laser
V = vertical laser
S = slope function
1

Inserting batteries

Open the battery compartment
and insert batteries (3 x type AAA)
according to the symbols. Be sure
to pay attention to polarity.
CompactCube-Laser 3
1H 2V
–
S
09
EN