Remote Control - Altana BYK byko-spectra pro Kurzbedienungsanleitung

BYK-Gardner GmbH

5 Remote Control

Switch between illuminants remotely in a distance up to 10 m. Please follow
the specified steps to take your remote control into operation.
1. Go to SETUP > ADMIN > SYS.
2. Chose RF Remote En.
Press ENTER to access the editing screen. Set to Enable then press SAVE.
3. Chose RF RemoteAdd.
Set a number between 1 and 8 and save. To return to main menu, please
press EXIT.
Turn around the remote control. Set the dipswitch with same number between
1 and 8 to 'ON'.
The remote control will turn off, if there is no action for 30s. Press red power
button
301 300 039 - 2109
1
to wake it up.
byko-spectra pro
2
3
9