Wall-Mounted Installation; Ceiling Installation - Airwell FDMX-050N-09M25 Betriebs Und Installationsanleitung

8. Remove the side board and the grille.
Hanging Hanging arm
screw bolt
9. Mount the indoor unit onto the hanging
screw bolts with a block.
Position the indoor unit on a at level by using
a level to prevent leaks.
Shockproof cushion
Washer
Hanging screw bolt
NOTE: Con rm the minimum drain tilt is 1/100 or
more.

Ceiling Installation

D. Refrigerant pipe
connection
(D.gas side)
E. Refrigerant pipe
connection
(E. Liquid side)
Drain point
Downward slope between(1-2)/100
 Page 24 
Side board
Screw nut
Overhang part
How to install the conduit installation plate
(if supplied)
1. Fix the sheath connector (not supply) on the
wire hole of the conduit installation plate.
2. Fix the the conduit installation plate on the
chassis of the unit.
Chassis
Cord conduit
The conduit
installation plate

Wall-Mounted Installation

How to install the conduit installation plate
(if supplied)
1. Fix the sheath connector (not supply) on the
wire hole of the conduit installation plate.
2. Fix the conduit installation plate on the electric
control box.
The electric control box
The conduit
installation plate
The conduit
installation plate
screws
(not supply)
screws
(not supply)