Indoor Unit Installation; Do Not Install Unit In The Following Locations; Select Installation Location - Airwell FDMX-050N-09M25 Betriebs Und Installationsanleitung

Indoor Unit Installation

Installation Instructions – Indoor unit
NOTE: Panel installation should be performed
after piping and wiring have been completed.
Step 1: Select installation location
Before installing the indoor unit, you must
choose an appropriate location. The following
are standards that will help you choose an
appropriate location for the unit.
Proper installation locations meet the
following standards:
Enough room exists for installation and

maintenance.
Enough room exists for the connecting the

pipe and drainpipe.
The ceiling is horizontal and its structure can

sustain the weight of the indoor unit.
The air inlet and outlet are not blocked.

The airflow can fill the entire room.

There is no direct radiation from heaters.

Recommended distances between the indoor unit
The distance between the mounted indoor unit should meet the speci cations illlustrated in the
following diagram.
DO NOT
locations:
Areas with oil drilling or fracking
Coastal areas with high salt content in the
air
Areas with caustic gases in the air, such as
hot springs
Areas that experience power uctuations,
such as factories
Enclosed spaces, such as cabinets
Kitchens that use natural gas
Areas with strong electromagnetic waves
Areas that store flammable materials or gas
Rooms with high humidity, such as
bathrooms or laundry rooms
˜35mm
install unit in the following
 Page 21 