General Description; Extent Of The Delivery; Overview; Functional Description - Parkside PTKS 2000 G5 Originalbetriebsanleitung

• Emissions of wood dust which are harmful to the health when
used in closed rooms.
Please note that the use of our devices in accordance with the
designated purpose does not include commercial, handicraft or
industrial applications. We assume no warranty if the device is
used in commercial, handicraft or industrial businesses or for
equivalent purposes.

General description

The illustrations are on the fold-out pages.

Extent of the delivery

Carefully unpack the appliance and check that it is complete:
- Saw table with pre-assembled
carbide-tipped saw blade with 24 teeth
carbide-tipped saw blade with 48 teeth
(additionally enclosed)
- Blade guard with mounting material
- Riving knife
- Laser
- Batteries 1.5V AAA (2x)
- Guide rail
- Parallel stop
- Stop rail
- Transverse stop
- Table width extender (2x)
- Push stick
- Legs (4x)
- Central struts, short (2x)
- Central struts, long (2x)
- Rubber feet (4x)
- Stand brackets (2x)
- Table supports, short (4x)
- Instruction for use
Mounting Material
(a) Hexagonal bolt with collar, 16 pieces;
(b) Carriage bolt, 20 pieces;
(c) Washer, 20 pieces;
(d) Spring washer, 20 pieces;
(e) Nuts, 28 pieces;
Tools
- (h) Hexagon socket wrench HX 6
- (k) Ring spanner AF 10/22
- (i) Open-ended spanner AF 8/10
Additional tools required
- Phillips screwdriver

Overview

1 Saw table
1
2 Saw blade guard
3 Riving knife (not visible)
4 Saw blade (not visible)
5 Table insert
6 Table width extender
7 Guide rail
8 Scale
9 Handwheel
10 Base frame
11 Clamping screw
12 Crank handle
13 On/off switch
14 Speed switch
15 Cam lever
16 Parallel stop
17 Suction adapter
2
18 Push stick
19 Legs (4x)
4
20 Central struts, short (2x)
21 Central struts, long (2x)
22 Rubber feet (4x)
23 Stand brackets (2x)
5
24 Table brackets, short
7
25 Attachment points
18
26 Countersunk screws of the table insert
19
27 Fixing screws of the riving knife
28 Laser
22
29 Laser switch
30 Screw for battery compartment
31 Battery cover
23
32 Screw with knurled nut
33 Groove
27
34 Knurled screw
35 Stop rail
36 Transverse stop

Functional description

The table circular saw is used for cutting all types of wood length-
wise and crosswise (only with the transverse stop), depending on
the machine size. All types of round timbers must not be cut with
it.

Technical data

Bench circular saw ................................................PTKS 2000 G5
AC motor ..................................................230-240 V~ 50 Hz
Idle speed n .........................................................5000 min
1
Power consumption .................................. 1800 W (S1)**
Power consumption ............................ 2000 W (S6 40%)*
Idle speed n .........................................................3200 min
2
Power consumption .................................... 500 W (S1)**
Operating mode .............................................S6 40%*, S1**
Safety class .....................................................................
Protection category.......................................................... IPX0
Hard metal blade (dimensions to be used)
...................ø 254 x ø 30 x 2.8 mm or ø 254 x ø 30 x 2.6 mm
Thickness of saw blade's main blade ............................ 1,8 mm
Idling speed saw blade, n max. .............................. 7000 min
Number of teeth .........................................................24 / 48
Thickness riving knife ...................................................2.5 mm
min. Workpiece size WxLxH ............................... 10x50x1 mm
Table size ........................................................ 580 x 545 mm
Table size with all extensions ...........................580 x 1010 mm
Cutting height max. 90° ................................................85 mm
Cutting height max. 45° ................................................63 mm
GB IE
-1
-1
II
-1
21