Fakir ATMOS CLEAN Benutzerhandbuch Seite 41

EN
* Dry on hanger;
*They cannot be ironed;
*They cannot be dry-cleaned.
Removal of the Lime Residues
If the steam power decreases significantly, it may be necessary to remove lime
residues from the water boiler and accessories:
Cleaning of Water Tank from Lime
*Unplug the power cord from the power outlet.
Open the safety hatch and fill the tap water and vinegar (20 to 1) mix.
* Wait for 24 hours.
* Pour the mix into the sink
* Rinse the tank with clean water.
Cleaning of Accessories from Lime
*Unplug the power cord from the power outlet.
Open the safety hatch and fill the tap water and vinegar (20 to 1) mix.
* Place the accessories which you wish to clear the lime residues from.
* Fix the position of the appliance to make sure that you keep the steam away from surrounding
objects
and surfaces.
* Turn on the appliance. Run the appliance until all the mixture is used.
SAFETY NOTICE!
Avoid contact with water during the descaling process as this may cause
injury or damage.
Storage Method
1. Lower the water tank down and discharge the remaining water.
2. Press and hold the steam release button on the handle; the steam will be released until
there is none left.
3. Turn off the appliance using the on-off button and then unplug it.
4. Take off the accessories.
5. Use an 8mm hexagon wrench or coin to unscrew the safety cover from the body, if it still
generates steam, please wait a minute, fully open the screw until no steam escapes under
the safety hatch
6. Slightly shake the appliance, lay the main body down, and release the remaining water out.
7. After naturally drying off the main body and the accessories, store them in a dark and dry
place.
41