Built-In Installation And Repair; Bulb Replacement - Midea B 3.60 IX Bedienungsanleitung

0 3

BUILT-IN INSTALLATION AND REPAIR

BULB REPLACEMENT

For replacement, process as follows:
1. Disconnect power from the mains outlet or switch off the circuit breaker of
the unit's mains outlet.
2. Unscrew the glass lamp cover by turning it counter-clockwise
(note, it may be stiff) and replace the bulb with a new
one of the same type.
3. Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V, T300°C halogen
lamps.
SECURING THE OVEN TO THE CABINET
1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabinet with two
distance holders " A " which fit the holes in the oven
frame and fit the two screws " B ".
VENTILATING OPENINGS
When cooking is finished or in pause state or in waiting state, if the oven's center
temperature is over 75 degree, the cooling fan will continue working for 15
minutes. Or when the oven's center temperature becomes lower than 75 degree,
the cooling fan will stop in advance.
Ventilating openings
EN-10