General Safety Instructions - LaserLiner BeamControl-Master Bedienungsanleitung

Completely read through the operating instructions, the „Warranty and
! Additional Information" booklet as well as the latest information under
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
Manual rotary lasers
– Exact horizontal alignment
– Additional vertical levelling
– Easy alignment of slopes
– Laser modes: spot, scan, rotary and hand receiver mode
– Plumb function for synchronous working on floor and ceiling
– Special die-cast zinc platform guarantees long-term stability
– SpotLite marking: Effective prevention of parallax errors and easy marking
of reference heights

General safety instructions

– The device must only be used in accordance with its intendedpurpose and within the
scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise invalidate
the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or
significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery
charge is weak.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut their eyes
and immediately move away from the beam.
12
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
EN 60825-1:2014/AC:2017