Playing A Compact Disc (Cd); Repeat Function; Program Function - LENCO DAR-051 Bedienungsanleitung

Playing a compact disc (CD)

NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner disc if it
becomes dirty.
1. Press the POWER button to turn on the unit.
2. Press the SOURCE button repeatedly to select the CD function.
3. Press the button to open the CD door and insert a CD into the tray (with printed label side facing
up).
4. Press the button again to close the CD DOOR and the disc will rotate for a few seconds, then play
the 1st track automatically.
5 . To temporarily stop playback, press the
6 . Press the button to STOP play.
REVERSE/FORWARD
1 . The and
speed.
2 . Press the button once to skip to the beginning of the current track. Press it two or more times to hear
previous tracks on the disc.
3 . Press the button to start playing the next tracks on the disc.
4 . During playback, press and hold
release it at the point you want to listen to.
5 . Press and hold the
When the desired track section is found, release the selected button and normal playback will resume.

REPEAT FUNCTION

The REPEAT button may be used to repeat a single track or repeat all tracks on a compact disc.
1 . Press the REPEAT button once during playback, the "REPEAT ONE" symbol will appear on the LCD display
for about 2 seconds. The same track will be repeated over and over.
2 . Press the REPEAT button a second time to repeat all tracks. The "REPEAT ALL" sign will appear on the LCD
display for about 2 seconds.
3 . To cancel REPEAT PLAY, press the REPEAT button repeatedly until "REPEAT OFF" appears on the LCD
display for about 2 seconds.

PROGRAM FUNCTION

The Program feature may be used to program up to 20 tracks to play in a selected order.
1 . While in the stop mode only (CD is not playing), press and hold the PROG button for 2 seconds,
and the LCD display will show the wording "P 01" and "T 01" starts to flash.
2 . Press the and
3 . Press the PROG button to select and store the track into memory.
4 . Repeat step 2 to 3 to select up to 20 tracks.
5 . To play the selected tracks (in the program mode), press the
6 . Press the button to hear the previous program track or press the
program track.
Note: After all programmed tracks have been played, the CD player will return to the stop mode.
7 . To clear the programmed tracks from memory, press
MP3 DISC SECTION
1 . Press the POWER button to turn on the unit.
2 . Press the SOURCE button repeatedly to select CD Mode.
3 . Close the CD Door and the disc will rotate for a few seconds and then play the 1st track automatically.
4 . Press the and
5 . To temporarily stop playback, press the
6 . Press the button to stop play.
Buttons used to jump to a different track number or hold to scan disc tracks at high
or
button, the current track will be sped up towards the next track(s).
buttons to allocate the desired track.
buttons to choose a track.
button, and to resume playback, press it again.
buttons to find a specific passage within the track and
button.
button twice.
button; to resume, press the button again.
- EN 15 -
button to hear the next