All manuals and user guides at all-guides.com
ASSEMBLY INSTRUCTIONS
FIG.3:
Insert handlebar post (17) into main frame (16)
and secure with the adjustor (19) in the desired
height. Attach the handlebars (18) to handlebar
post (17) as shown and fix with the adjustor
(22) and the bolt (25). ATTENTION: FIX THE
HANDLEBARS TIGHTLY!
Attach computer (72) to computer holder on
handlebars (18) and connect the cable ends
(A1&A2) as shown.
FIG.4:
Attach the right pedal (1R) onto the right crank
and tighten it by turning it clockwise.
Then attach the left pedal (1L) onto the left
crank and tighten it by turning it anticlockwise.
The pedals are marked with "R" (right) and "L"
(left).
39