Osd Notice; Osd And Hot Keys Setting - ViewSonic VSD243 Bedienungsanleitung

4.3 OSD Notice

idling:
The OSD menu will close and return to the original processed OSD menu
after the OSD time out value expired.
No signal:
• There is no HDMI connection.
• The connected HDMI source and your smart display is not active. Make
sure the HDMI source is not in Off, Standby, Hibernate or Sleep mode.

4.4 OSD and Hot keys setting

OSD Lock: Press and hold the OSD menu [
seconds to set. If any buttons are pressed, the message OSD Locked will
display for 3 seconds.
OSD Unlock: Press and hold [
seconds to unlock.
Power Button Lock: Press and hold [
seconds to set. If the power button is pressed, the message Power Button
Locked will display for 3 seconds. With or without this setting, after a power
failure, your LCD display's power will automatically turn ON when power is
restored.
Power Button Unlock: Press and hold [
for 10 seconds to unlock.
DDC/CI enable/disable: Press [ ] and [▼] keys at the same time to toggle
SSC/CI and DDC/2B (DDC/CI enable/disable) to allow the computer to send
specific Monitor Control Command Set (MCCS) to command the devices, as
well as receive sensor data from the devices, over a bidirectional link.
] and the up arrow [▲] for 10
] and the up arrow [▲] again for 10
] and the down arrow [▼] for 10
] and the down arrow [▼] again
15
OSD Menu