Trouble-Shooting - Pressalit SCT 3000 Gebrauchs- Und Pflegeanleitung

Trouble-shooting

Symptom
The shower table
does not stay in
upright position .
The product will not
work, even though
the remote control is
used correctly .
The water does not
run out of the water
collection tray .
The shower table
runs up and down
unevenly .
Contact Pressalit A/S or your dealer if the problem cannot be remedied .
Do not attempt to repair the product yourself, as this will invalidate the
guarantee .
Cause
One or more gas
cylinders are
defective .
Fault in power supply .
Adjustment screws
too high or too low .
The sliding brackets
are not properly
lubricated .
1
Action
Contact Pressalit A/S or
your local dealer .
Check that all wires and
plugs are intact and
correctly connected .
Contact Pressalit A/S or
your local dealer .
Adjust the adjustment
screws .
①
Oil the sliding brackets
as described under
"Maintenance" .
en
23