Dmx Controlled Operation - EuroLite LED PST-10 QCL Spot Bedienungsanleitung

DMX controlled operation

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 9 control channels.
However, it can also be switched to a mode with 3, 4, 5, or 6 channels if different functions are required.
Tobe able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller's documentation.
1 Press the MENU button so many times until Addr is indicated in the display. Confirm with the ENTER
button.
2 The display indicates 3 CH (3 DMX channels), 4 CH (4 DMX channels), 5 CH (5 DMX channels), 6 CH
(6 DMX channels) or 9 CH (9 DMX channels). Use the buttons UP and DOWN to select the desired
number of DMX channels. Confirm with the ENTER button.
3 Now the display indicates the menu item for the DMX start address d***. Use the buttons UP and DOWN
to set the address. Confirm with the ENTER button.
4 When DMX control signals are received, the dot in the display flashes. In the absence of DMX control
signals, the display and the dot flash alternately.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
Functions in DMX mode
3-channel mode
Channel
CH 1
CH 2
CH 3
4-channel mode
Channel
CH 1
CH 2
CH 3
CH 4
5-channel mode
Channel
CH 1
Master dimmer
CH 2
Strobe effect
CH 3
Preset colors
Value Function
000 – 255 Red, increasing intensity 0 – 100%
000 – 255 Green, increasing intensity 0 – 100%
000 – 255 Blue, increasing intensity 0 – 100%
Value Function
000 – 255 Red, increasing intensity 0 – 100%
000 – 255 Green, increasing intensity 0 – 100%
000 – 255 Blue, increasing intensity 0 – 100%
000 – 255 White, increasing intensity 0 – 100%
Value Function
000 – 255 Total brightness 0-100 %
000 – 009 No function
010 – 255 Strobe with increasing speed 0-100%
000 – 009 No function
010 – 019 Red
020 – 029 Green
030 – 039 Blue
040 – 049 White
050 – 059 Yellow
060 – 069 Magenta
070 – 079 Cyan
080 – 089 Dark orange
090 – 099 Green yellow
100 – 109 Salmon
26/32 00132514, Version 1.0