Driver Installation - Asus Xonar DG SI Schnellstartanleitung

3.2 Card installation
Before you proceed with the following installation steps, disable your onboard
audio device in your BIOS settings, or uninstall any other audio cards on your
PC. For BIOS setting or uninstallation of other sound cards, refer to the user
manuals of your motherboard and audio card.
Installing the Xonar DG SI card
1. Power OFF the computer, the monitor, and
all other peripheral devices connected to
your computer.
2. Unplug the computer power cord from your
computer and power outlet.
3. Touch the metal back or side panel of the
computer to avoid static electricity.
4. Remove the chassis cover.
5. Remove the metal bracket from an available PCI slot for the Xonar DG SI
audio card.
6. Carefully insert the audio card into the PCI slot. Ensure the audio card sits
properly in place.
7. Secure the audio card with screws and the metal bracket.
8. Put back the chassis cover.
9. Reconnect all cables.
10. Plug the power cord to the computer and to a power outlet.
11. Power ON the computer.
4.

Driver installation

Installing the Xonar DG SI card driver
1. After you have installed the Xonar DG SI card, turn on your computer.
Windows
drivers. When prompted for the drivers, click Cancel.
2. Download the driver from ASUS support website. Open the driver folder and
run setup.exe.
3. Follow the onscreen instructions to finish the installation.
U7793_Xonar DG SI_QSG.indb 5
All manuals and user guides at all-guides.com
automatically detects the audio card and searches for device
®
ASUS Xonar DG SI Quick Start Guide
1
2
5
11/7/12 1:00:38 PM