Changing The Unit Of Measurement; Cleaning - ADE WS 1831 Bedienungsanleitung

Changing the unit of measurement

While the currently measured values (not MAX or
MIN) are displayed:
− Press and hold down the MAX/MIN button
Resetting
If the display shows obviously wrong values, you
should reset the device to the default settings.
1. Insert a thin object such as an unfolded paper
2. Press with a little force against the resistance.

Cleaning

− Wipe clean the device with a slightly damp
Digital thermometer/hygrometer WS 1831
Druckbuch Thermo-Hygrometer WS 1831.indb 33
until the display shows the respective
alternative unit of measurement (°C or °F).
clip into the reset opening on the back.
The displayed data will be deleted and the
newly imported data will be displayed shortly
thereafter.
cloth, if necessary.
33
07.06.2018 13:13:10