Assembly And Setting Up; Before First Use - Silvercrest STGG 1800 A2 Bedienungsanleitung

Assembly and setting up

WARNING! RISK OF FIRE!
► Never place the appliance underneath wall
cupboards or next to curtains, cupboard
walls or other flammable objects.
► Set up the appliance at least 70 cm from any
flammable materials (e.g. curtains).
► Always place the appliance on a heat-resistant
surface.
► Set up the appliance with its rear side directly
against the wall. When doing so, ensure that
the wall is made of heat-resistant material
and that the lid
1) Remove all of the parts from the box and
remove the packaging material and any
protective film.
2) Clean all components as described in Chapter
"Cleaning and care". Ensure that all parts are
completely dry.
3) Place the appliance on a heat-resistant, clean
and level surface.
4) Place the drip tray
it sits in the recess to the left of the centre.
ATTENTION! DAMAGE TO PROPERTY!
► Never use the appliance without the drip
tray ! Otherwise hot fat and other hot
liquids will drip down from the appliance
onto the surface below.
5) Place the griddle
Ensure that the socket
The griddle must sit correctly in the frame
otherwise the thermostat
nected to the socket
6) Push the hinges of the lid
the frame and close the lid
■ 60 │
GB
can open fully.
in the frame so that
onto the frame .
is on the right side.
cannot be con-
.
into the recess on
.
7) Connect the thermostat
on the appliance. Ensure that the thermostat
pushed up to the stop in the socket
the appliance cannot heat up!
Before first use
1) Open the lid by pushing up the catch on
the handle and, at the same time, pulling
the lid upwards.
Open the lid until the hinges slide down
into the hinge guides
in place.
2) Wipe the griddle
3) Close the lid by lifting it lightly into the
hinge guide so that it can be folded shut.
4) Insert the plug in a mains power socket and
set the temperature control
appliance will heat up.
5) Wait for 10 minutes.
6) Then disconnect the plug and allow the appli-
ance to cool down.
NOTE
► The first time the appliance heats up, a small
amount of smoke and smell may be generated
due to production-related residues. This is
completely normal and is not dangerous.
Provide sufficient ventilation by opening a
window, for example.
7) Wipe the griddle
cooling.
8) Clean the drip tray
"Cleaning and care".
9) Ensure that all parts are completely dry before
operating the appliance.
The appliance is now ready for use.
with the socket
. Otherwise
and the lid is firmly
with a moist cloth.
to level 5. The
with a damp cloth after
as described in Chapter
STGG 1800 A2
is