Cleaning And Maintenance - Concept ZN8006 Bedienungsanleitung

Vorschau ausblenden

Inhalt

Seite von 49

/ 49
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

Note:

The

Tag with ironing info

5. Wait until the heating indicator stops shining. Only then has the ironing surface reached the right temperature. The

ironing surface will be heated during ironing. The heating indicator will turn on and off.

6. After use, set the temperature controller to the minimum, unplug the unit from the power source, and let it cool

down. Then pour the remaining water out of the tank.

Anti-dripping function (ANTI-DRIP) - available on model ZN 8008 only

This unit is equipped with a function that prevents water from dripping, i.e. it will automatically stop steaming if the

temperature is too low and water could be dripping from the ironing surface.Limescale sedimentation preventive

function (ANTI-CALC)

This function is based on the filtration of materials from the water used. It softens the used water, which reduces the

sedimentation of limescale in the steam chamber.

Self-clean function

This function allows cleaning small sediments from the steam chamber. Use it once very two weeks.

1. Fill the tank with water (see Filling with Water).

2. Insert the plug into the mains outlet.

3. Set the temperature control to the maximum.

4. Wait until the heating indicator light stops shining.

5. Hold the unit horizontally over a sink or wide water vessel.

6. Push and hold the Self-clean button. Water will pour from the steam holes in the ironing surface, which will rinse

out small sediments from the steam chamber.

STORAGE

Keep the cooled unit in a vertical and stable position in a safe and dry place, out of the reach of children.