EN
Technical Information
Voltage
: 220V-240V
Capacity
: 330 ML of Volume
Frequency
: 50-60 Hz~
Power
: 1300W:
Assembly
NOTE!
Make sure that the appliance is unplugged and cooled down before installing/removing
any part of the appliance.
The handle is delivered as 2 parts:
• Handle
• Aluminium tube
1. Insert the handle in the aluminium tube, applying gentle pressure until you hear a click,
which indicates that the handle has snapped into place.
2. When you complete this procedure, attach the aluminium tube on the main body of the
appliance so that the cable winding hook shall be parallel to the rear of the appliance. Press
the tab on the bottom to fully insert and secure the aluminium tube. It shall be seated with a
"click" .
3. If you want to remove the aluminium tube, press the release button on the back of the
appliance and lift the mechanism upwards. The release button on the top of the handle allows
you to disassemble the parts of the aluminium tube when required.
4. To attach the floor apparatus to the main body, align the buttons on the body and the
apparatus and lightly press on the buttons. You may use it once you are sure that it is
completely attached.
34